99久久婷婷国产综合亚洲-福利视频一二三在线观看-已婚少妇美妙人妻系列-午夜亚洲精品久久一区二区-人妻中字视频中文乱码

Product Advantages
üFunction
●Operating frequency is 13.56MHz,in line with ISO-15693 standard
●Support RS-232/RS-485 communication mode
●One-piece design,compact structure,convenient for distributed installation and deployment

üPerformance

●With IP67 protection grade can adapt to harsh environments such as oil (cutting fluid,etc.),dust,moisture,etc.

●Efficient data collection capability can effectively improve the accuracy of data collection in MES systems.

●The interface uses a 5/8-pin industrial aviation plug (male)/threaded connector to ensure connection in vibration environment.

●Built-in filtering and isolation module,they have strong anti-interference ability to EMC.

üApplication:

Power battery production line,Automobile production line,Household appliances /3C mixed flow production line,AGV,etc.

üTypical Application:

2Engine Assembly Line

The reader can interface with various PLCs such as Siemens,Schneider and Mitsubishi through the industrial bus controller. By reading the RFID tag mounted on the tray,passing the information to the PLC, Through the information of installation to guide the assembly robot or the assembler to auto select the appropriate part,the engine assembly efficiency can be greatly improved.

2Power Battery Assembly

Install the SG-HR-I2 reader at the RFID collection point, and the on-line station collection point reads the RFID tag in the material box to obtain the information of slots in the material box (each slot is equipped with a cell with different voltage), The voltage value/grade of the test cell is written into the material box RFID tag at the test station of the voltage cell. When the cell is classified, read the RFID tag information of the material box and connect the robot in real time to automaticaly put the cell into the corresponding cell transport track. After the robot takes down the cell with different gear from the transport track and puts them into the same material box it will write the cell gear information into the RFID tag of the material box. Through the operation of each station on the RFID tag, a series of processes such as cell division, transportation, encapsulation, and assembly are completed in the process of cell assembly.

2Intelligent Application of Home Appliance Manufacturing Process

Through RFID data acquisition technology (By adding RFID tags on the product/tooling board and deploying RFID readers on the workstation),the unmanned,automatic and real-time identification of single-item products on the production line is realized.

Using real-time collected product information,complete error prevention of mixed flow production materials,real-time push of process guidance,automatic diversion of defective products,automatic generation of quality reports,product traceability management,mixed flow line alarms,and equipment automation docking.

Technical Parameters

Dimension Drawing（mm)

Way of Installation

2Installation of the readers

The product comes with M30*1.5 thread. When fixing, use two nuts to clamp on the bracket. 


2The distance between two readers

When there are multiple readers to be installed, the distance between the readers needs to be greater than 100MM.

2Installation of the Tags

When installing the tag, it is necessary to make the sensing surface of the reader parallel to the front of the tag.